DE 20 Series Thermostat

Application

Precise digital control for.heating, cooling, consistent plating and etch rates in most aqueous processes.

Materials

N/A

Performance

Up to 20 amps

Specifications

See Product bulletin for details.

Features

- Provides precise control for consistent plating and etch rates in most aqueous processes

- NEMA 1, IP21, flame retardant and gasketed plastic enclosure with stainless steel hardware

- ±.25% full span, single digit accuracy

- Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm platinum RTD sensor included standard with the control. Provides extended service in corrosive liquids and can be lengthened with ordinary copper wire

- Single pole, double throw switch rated at 20* amps for either 120 or 240 volts. *12 amp full load max if operating a heater with a thermal protector

- 20°F(-7°C) to 140°F(60°C) ambient temperature range

Quote Request

Single Set-Point, Precise Control.

Provides precise digital control for consistent plating and etch rates in most aqueous processes. Vapor resistant. Up to 20 amps (may be lower with some heaters). Adjustable temperature range from -40°F (-40°C) to 999°F (538°C), high temp sensor required.

Options: Three wire 100-ohm RTD sensors, 25-foot (7.6m) and 50-foot (15.2m) sensors, scalable voltage and current inputs ,convertible to direct acting output for cooling applications.

Safety: Non-volatile memory, programmable high alarm shutdown, sensor short and break protection, programmable high set point limit, security code restricted menu.

Process Technology Product Bulletin

Download file

Category