Authorized Distributor & Service Center Since 1988

Founded in 1988, Service Filtration is an Ontario-based pump distributor and service center for major brands like Goulds Water Technology, Finish Thompson, Iwaki, Price Pump, Serfilco, MDM, and more. We service Canada-wide and have a diverse product line allowing us to offer the best solutions to your liquid process applications. Our ready-to-ship stock covers hundreds of complete pumps, pump-ends, and spare parts that are tested and pre-assembled before delivery for fast and easy installations. 

 

Our pumps come in a wide range of sizes, in both metallic and non-metallic construction, with some of the most diverse, high-end material selections in the industry. From simple water transfer to the most aggressive chemical processes, our product lines cover nearly every fluid-handling application.

Choose from Our Wide Selection of Branded Pumps

 

Air Operated Diaphragm AODD Pumps 

 

Pumps built for transferring corrosive, viscous, slurry, or hazardous fluids across a wide range of applications. Self-priming, dry-running, and solids-handling capabilities make them some of the most versatile pumps on the market.

 

Drum Pumps 

 

Portable pumps designed to safely transfer oils, diesel, chemicals, and other process fluids from drums, barrels, totes, and other storage containers.

 

Metallic Mechanical Seal Pumps 

 

Stainless steel centrifugal pumps in Cast or Stamped 316SS and 304SS, including Cast Iron and Bronze models, for water, oils, and general process fluids. A cost-effective choice, with a wide selection of mechanical seals and options matched to your process.

 

Metallic Sealless Magnetic Drive Pumps 

 

A magnetic coupling replaces the shaft seal, eliminating a common leak point in older mechanical seal technologies. Designed for high-pressure, high-temperature, and high-purity fluid applications. 

 

Metering Pumps 

 

Positive-displacement pumps that deliver precise, repeatable volumes of liquid at an adjustable flow rate. Ideal for chemical dosing and injection.

 

Plastic Mechanical Seal Pumps 

 

Corrosion-resistant thermoplastic pumps built for acids, caustics, and abrasive liquids in demanding chemical processes. 

 

Plastic Seal-Less Magnetic Drive Pumps 

 

Available in PP, PVDF, or ETFE-lined construction, with a magnetic coupling that eliminates the shaft seal for leak-free, corrosion-resistant operation. The industry standard for chemical transfer and recirculation.

 

 

Self-Priming Centrifugal Pumps

 

 

Purpose-built to evacuate air from the suction line and lift liquids from below the pump, including tanks, sumps, and collection pits. Suction lifts up to 25 feet, available in metallic and plastic construction with mechanical seal or seal-less designs.

 

Vertical Pumps 

 

Mounted above the tank with the pump end submerged, so no priming is needed. Out-of-tank options available. Built for transferring or recirculating liquids from sumps, tanks, and process vessels in wastewater treatment, chemical processing, fume scrubbers, and other applications.

 

How to Choose the Right Pump for Your Liquid Process

 

Contact us to put our decades of experience to work. We have provided pump solutions for hundreds of applications every year across Canada for over 35 years.

 

Start With the Liquid

 

Every liquid has its own compatibility with pump materials and technologies. Corrosive, abrasive, hot, or solids-laden fluids need extra consideration. For example, PP or PVDF plastic pumps are often the best choice for corrosive chemicals, while cast iron and 316 stainless steel pumps suit water, oils, and many process fluids.

 

Pick the Right Pump Technology

 

Each pump type is built for a different job:

 

• Centrifugal pumps are used in a wide range of liquid process applications to efficiently recirculate and transfer fluids. 

• Magnetically driven pumps eliminate the shaft seal for leak-free handling of hazardous or corrosive chemicals.

• AODD pumps transfer wastewater, chemicals, viscous, abrasive, or solids-laden fluids, can run dry, and self-prime. They are versatile and easy to use. 

• Metering pumps deliver precise, repeatable doses of chemicals.

• Self-priming and vertical pumps draw liquid from below the pump, out of sumps, tanks, and pits.

• Drum pumps empty drums, totes, and barrels safely.

 

Size the Pump to Your Flow and Process Requirements

 

Flow and head narrow the selection further. Confirm your required flow rate and total head pressure, along with fluid properties such as specific gravity, viscosity, and temperature. Not sure where to start? Send us your process details, and we’ll review the options and recommend the best solution.

 

Why Canadian Plants, OEMs, and Engineering Firms Trust Service Filtration for All Their Pump Needs 

 

Technical Service, Repair & Troubleshooting Support

 

With decades of technical experience and factory-certified repair technicians on staff, we provide troubleshooting and after-sales support for the life of your pump. When an issue comes up, you can reach our technicians directly for fast service and solutions.

 

Readily Available Stock

 

Our Oakville, Ontario facility is well-stocked with complete pumps, pump parts, and spare parts. This allows us to ship your ordered item the same day, with same-day and next-day services available. No more waiting weeks and stopping critical operations to get what you need. 

 

Assembled & Tested Before Delivery

 

Our in-house assembled and repaired pumps are tested for maximum quality assurance. Factory-certified technicians are here to help you with on-site start-up and training to minimize disruptions and maximize equipment longevity. 

 

Pump Brands & Industries We Serve

 

Service Filtration is an authorized industrial pump supplier for trusted brands including Goulds Water Technology, Finish Thompson, Finish Thompson Air, Iwaki America, Price Pump, and Serfilco.

 

Trusted in thousands of facilities across Canada. Our pumps transfer and recirculate liquids in surface finishing and treatment, chemical manufacturing, water and wastewater treatment, air pollution control, aerospace, electronics, automotive, aquaculture, and OEM equipment, along with nearly every other industry that moves liquids.

 

FAQs 

 

Do you stock pumps in Canada? 

 

Yes. We stock hundreds of complete pumps, pump ends, and spare parts at our Oakville, Ontario facility, with same-day assembly and shipping across Canada.

 

Can you help me size a pump for my application? 

 

Absolutely. Send us your requirements, including liquid properties, operating temperature, required flow, head, and power supply, and our team will recommend the best pump for your process.

 

Do you repair pumps and supply them?

 

Yes. We support you through the entire life of your pump, from selection and start-up to troubleshooting and repairs. Our factory-certified technicians are ready to help.

 

Talk To Our Pump Specialists! 

 

Send us your requirements and will get back to you with the best pump and pricing! Call 800.565.5278 or fill out the form below!