DLC Series Thermostat

Application

precise digital control for consistent plating and etch rates in most aqueous processes.

Materials

N/A

Performance

double throw switch rated at 16-amps

Specifications

Please see product bulletin for details

Features

- Large (.50” high), easy to read LED display. Provides precise control for consistent plating and etch rates in most aqueous processes.

- Vapor tight, IP64, front panel protection, plastic enclosure with sealed tactile switches (stand alone)

- 14°F(-10°C) to 158°F(70°C) ambient temperature range

- Single phase only

- Fluoropolymer (FEP) covered 10-foot (3m), thermistor included standard with the control. Provides extended service in corrosive liquids and can be lengthened with ordinary copper hookup wire.

- Single pole, double throw switch rated at 16-amps for either 120 or 240 volts. *12 amp full load max if operating a heater with a thermal protector.

- ± 1% full span, single digit accuracy

Quote Request

Single Set-Point, User Friendly Control

Provides precise digital control for consistent plating and etch rates in most aqueous processes. Large (.56” high), easy to read LED display. Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm thermistor sensor included standard with the control. Vapor tight, IP21, front panel protection, plastic enclosure with sealed tactile switches. Single pole, double throw switch rated at 16-amps for either 120 or 240 volts. Single phase. Adjustable temperature range from -58°F (-50°C) to 302°F (150°C).

Options: Celsius readout (must specify). 25-foot (97.6m) and 50-foot (15.2m) thermistors. Combination controls available for three phase service and larger heater loads. Direct acting output for cooling applications. Adaptor panels for control retrofits. *V option - 6 inch (152.4mm) x 3 inch (76.2mm) enclosure.

Safety: Non-volatile memory. Sensor short and break protection. Security code restricted menu.

Process Technology Product Bulletin

Download file

Category